Floor boar laminate cutter – The best way to cut is with manual machines. They are very inexpensive and very easy to use. Moreover, no dust problems as in the case of a radial cut. However, the process can be slow; if space is not large this is a good choice. If some tiles are tipper pieces, you can remove it with pliers.
You should also consider the type of tile to cut. If you are looking to floor boar laminate cutter tile may not operate this mower. The porcelain is very hard and should be cut with a diamond cutter tip. Determine what type of cut should done. If linear or not, in addition to the horizontal and diagonal length to make a good cut.
To cut with the manual floor boar laminate cutter, do a few guidelines to use as references. Thus the cuts will be more accurate and will in the direction you want. Once you have the template you can proceed to use the cutting machine. However, we must consider that not everyone can have a cutter or rent one. So you can use a screwdriver. You must spend carefully several times on the tile until you have removed the enamel tile and made a groove. By having this you can use a jig saw to make the cut.